Panasonic DMC-FP2 - [Print Set]

VQT2N02 71
For details about the setting procedure in the [PLAYBACK] menu (→14)
[PRINT SET]
Picture/picture no./date printing settings can be made for when printing with DPOF print-
compatible shops or printers. (Ask at shop to check compatibility)
Set-up: Press [MENU/SET]→
[PLAYBACK] menu → Select [PRINT SET]
Select [SINGLE] or [MULTI]
Select picture
●
[SINGLE]
●
[MULTI]
Set number of pictures
(repeat steps and when using [MULTI] (up to 999 pictures))
●
[SINGLE]
●
[MULTI]
Date print
set
No. to print
Date print set
No. to print
• Date print setting/release → Press [DISPLAY] button.
• After confirmation, press
to return to the menu screen.
■
To clear all
Select [CANCEL] in step
and select [YES].
●
When using PictBridge-compatible printers, check settings on actual printer as these
may take priority over camera settings.
●
To print from built-in memory at a shop, first copy pictures to card (→73) before making settings.
●
DPOF print settings may not be made to non-DCF (→31) files.
●
Some DPOF information set by other equipment cannot be used. In such cases, delete
all of the DPOF information and then set it again with this camera.
●
Date printing settings cannot be made for pictures with a [TEXT STAMP] applied. These
settings will also be cancelled if a [TEXT STAMP] is applied later.