Panasonic DMC-FP2 - [Copy]

VQT2N02 73
For details about the setting procedure in the [PLAYBACK] menu (→14)
[COPY]
You can copy pictures between built-in memory and memory card.
Set-up: Press [MENU/SET] →
[PLAYBACK] menu → Select [COPY]
Select the copy method (direction)
: Copy all pictures from built-in memory to card
(go to step )
: Copy 1 picture at a time from card to built-in
memory.
When selecting , press ◄► to select a picture, and then
press [MENU/SET]
Select [YES]
• To cancel → Press [MENU/SET]
• After confirmation, press to return to the menu
screen.
(Screen shown is example)
●
If there is not enough space on the built-in memory for copying to be performed, turn off
the power, remove the card, and delete pictures from the built-in memory.
●
Copying of picture data from the built-in memory to memory cards will be terminated
midway if there is insufficient space on the card. Using memory cards with higher
capacities than the built-in memory (approx. 40 MB) is recommended.
●
Copying pictures may take several minutes. Do not turn off power or perform other
operations during copying.
●
If identical names (folder/file numbers) are present in the copy destination, a new
folder for copying will be created when copying from built-in memory to card ( ).
Identically-named files will not be copied from card to built-in memory ( ).
●
The following settings will not be copied. Set them again after copying.
[FAVORITE], [PRINT SET], [PROTECT]
●
Only pictures from Panasonic digital cameras (LUMIX) may be copied.
●
Original pictures will not be deleted after copying (to delete pictures (→32)).
●
This setting can only be made when the Playback Mode is in [NORMAL PLAY].