Panasonic DMC-FP2 - Convenient Ways to Turn the Power on

24 VQT2N02
Sequence of Recording (Continued)
■
Holding the camera
Flash
AF Assist Lamp
• If jitter becomes noticeable, use both hands, keep your
arms close to your body, and stand with your feet at
shoulder width.
• Do not touch the lens.
• Do not block the microphone when recording motion
picture. (→7)
• Do not block the flash or the AF Assist Lamp. Do not look
at it from close range.
• Try to hold the camera steady when you press the
shutter button.
Convenient ways to turn the power on
Besides opening the lens cover, you can also turn the power on as follows.
■
To turn the power on in playback mode
Hold
Pictures on the card or built-in memory are
displayed.
■
With the lens cover opened and the power off
Hold
The camera will turn on in recording mode.
• When the Power button is held with the lens cover
closed, a message [PLEASE OPEN THE LENS
COVER] is displayed.