Panasonic DMC-FP2 - Registering Commonly Used Scenes; [My Scene Mode]

48 VQT2N02
Registering commonly used scenes
[MY SCENE MODE]
Recording mode:
●
For details on the preset scene, see the pages on scene mode. (→40)
●
If recording settings are reset by [RESET] in the [SETUP] menu, the preset scene
mode is cleared.
Display the screen for recording
mode selection
Select [MY SCENE MODE]
If you have already registered in My
Scene Mode, it is displayed as a
registered scene.
Select and set the scene
(Press [MENU/SET], select , and then press
►, if the scene menu is not displayed.)
●
Scene menu
The zoom lever
can also be used
to switch to the
next screen.
To see a description of a scene:
Select the scene, and press [DISPLAY].
■
Taking pictures in
registered scene mode
Press the [MODE] button.
Press ▲▼ to select the
registered scene, and then
press [MENU/SET].
■
Changing registered scene
mode
Press the [MODE] button.
Press ▲▼ to select the
registered scene (second
from the top), and then press
[MENU/SET].
Press [MENU/SET], select ,
and then press ►.
Select the scene in the scene
menu, and then press [MENU/
SET].
You can register a commonly used scene mode in
.
After you register it, simply switch to [MY SCENE MODE] and you can record in the
registered scene mode.
[MENU/SET]
[DISPLAY]
Zoom lever