Software Update in Standby
When you set this unit to standby mode,
software (firmware) updates (O 101) are
downloaded automatically at the time
you have specified.
Software Update Now ( Broadcast)
You can check for the latest software
(firmware) version and update the
software (firmware) from broadcaster
immediately.
IDVB-CI However, some cable providers
do not support this function.
Software Update Now (Internet)
Refer to “Software (Firmware) Update”.
(O 101)
• Network connection and setting are
required. (O 20, 24)
Software Licence
Information about the software licence
is displayed.
System Information
Display Software (firmware) version, HDAVI
Control version and Wireless Module
version (When using wireless connection
only) of this unit.
Initialize
Shipping Condition
All the settings except for some settings
return to the factory preset.
• The timer recording programmes are
also cancelled.
• The device password is also initialized.
(O 97)
Default Settings
All the settings other than the tuning
settings, clock settings, disc language
settings, rating PIN, remote control code,
device password, etc. return to the factory
presets.
To Next Page
Loading...
