Panasonic DMR-BCT835 - Troubleshooting

Convenient functions
Switching the aspect ratio of the screen
When the image does not match the screen
size of the TV, you can enlarge the image to fill
the screen.
1 Press [OPTION].
2 Select “Playback Settings” in “Playback
Menu”, then press [OK].
3 Select “Aspect” in “Basic Operation”,
then press [OK].
4 Select the item, then press [OK].
Normal:
Normal output
Side cut:
The black bars on the right and left sides
of the 16:9 image disappear and the
image is enlarged.
Zoom:
The black bars on the top and bottom
sides of the 4:3 image disappear and the
image is enlarged.
HOLD function
The HOLD function deactivates all buttons on
the unit and remote control.
Press and hold [OK] and [RETURN @]
simultaneously until “X HOLD” appears on the
unit’s display.
To cancel the HOLD function
Press and hold [OK] and [RETURN @]
simultaneously until “X HOLD” disappears.
tn
• This function does not work when watching 3D programme
and playing back 3D title or 3D photo.
• It may also be adjusted using the screen mode of the TV etc.
• The screen mode is switched to “Normal” in the following
situations:
- when you change the channel
- when you start or end the playback of a title
- when you switch the unit on or to standby mode.
• | BD-V 11 DVD-V | “Side cut” does not have any effect.
• When “TV Aspect” 94) is set to “Pan & Scan” or “Letterbox”,
the “Zoom” effect is disabled.
VQT4W71
105