The tuner in this unit is compatible with digital
Cable broadcast services and digital terrestrial
broadcast services.
• In these operating instructions,
IDVB-CI : indicates features applicable to digital
cable broadcasts (DVB-C).
I DVB-T | : indicates features applicable to digital
terrestrial broadcasts (DVB-T).
• This unit can receive only one of the two
services at a time.
1 Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
2 Press [i] on the remote control or [i/I] on this
unit.
• The Easy Setting will start at the initial
power on.
3 Select language, then press [OK].
4 Select country, then press [OK].
5 Select “Digital Cable (DVB-C) Channels” or
“Digital Terrestrial (DVB-T) Channels”, then
press [OK].
© | DVB-C |
Select the channel number allocation,
then press [OK].
• For Germany and Austria:
Normally set to “Preset Channel
Number”.
• For Switzerland:
Normally set to “Operator's Channel
Number ( LCN )”.
L_]
• To change channel allocation, restart Auto Setup
in Basic Settings menu and change channel
number allocation selection. 86)
© I DVB-C |
Select “Start Auto Setup”, then
press [OK].
• Frequency
Auto
The preset frequency will be
automatically used.
Manual
Enter the frequency specified by your
cable provider with number buttons.
• Network ID
Auto
The preset Network ID will be
automatically used.
Manual
Enter the Network ID specified by your
cable provider with number buttons.
CJ
• Frequency and Network ID settings may be
necessary depending on the cable provider. For
details, consult the cable provider.
6 Auto Setup will start automatically.
(This operation may take some time.)
e.g., I DVB-C |
When tuning is completed, press [OK].
To Next Page
Loading...
