Panasonic FZ-M1 Series - Page 10

Flash Memory Backup/Restore Function
Panasonic Corporation will bear no responsibilityfor any damage suffered (including loss of data) as a result of the use of thisfunction.
Creating a Backup of the Flash Memory Data
You can create a backup of the flash memory data, which can be used to recover from hardware failure.
This function creates a backup of the recent state of the flash memory. To return the factory default, use a recovery disc. ( Create a Recovery Disc)
To create a backup of the flash memory to another storage media (e.g., external hard disk).
Connect the storage media, and follow the steps below.
1. Open the Control Panel, and then touch [System and Security] - [File History].
2. Touch [System Image Backup].
3. Touch [Create a system image].
Follow the on-screen instructions.
N O T E
n Connect the AC adaptor and do not remove it untilbackup is complete.
Restoring the Flash Memory Data
1.
Touch (Settings) - [Update & Security] - [Recovery].
2.
Touch [Restart now] under “Advanced startup”
*1
.
3. Touch [Troubleshoot] - [Advanced options].
4. Touch [System Image Recovery].
Follow the on-screen instructions.
*1 : Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For example,
[Advanced start-up] may be displayed instead of [Advanced startup] in some language preference.)
- 10 -