External Display
<Only when connected to Cradle>
You can switch the output destination to an external HDMI/VGA display.
Before switching the computer on, connect the HDMI/VGA display to the HDMI/VGA port and the AC adaptor to the DC-IN jack on the Cradle.
For further information of the connection with terminals, refer to “Cradle”.
Switching the display mode
1.
Touch (Settings) - [System] - [Display].
2. Settings the “Multiple displays”.
N O T E
n After switching the display mode, the display resolution may change.
n After resuming from sleep or hibernation, or restarting the computer, the output destination may not be the same as selected in the pre-
vious status.
n When you change the display after Windows starts up, do not press any button until switching is complete.
n Do not connect or remove the external display during sleep or hibernation.
n It may take some time to switch between displays depending on the displays used.
n When you use the external display only, set the suitable number of colors, resolution, or refresh rate separately from when you use the
internal LCD only or when you use the simultaneous display.
Depending on the settings, some external displays may be distorted or may not display the mouse pointer correctly. In this case, set
the settings to lower value.
n When you use the simultaneous display, MPEG files and other motion image files may not be played back smoothly.
n Carefully read the instruction manual of the external display.
n When connecting an external display that does not conform to the Plug & Play standards, select the display driver accordingly in the
following menu, or use the driver disc supplied with the monitor.
1.
Touch (Settings) - [System] - [Display].
2. Touch [Advanced display settings] under “Multiple displays”.
3. Touch [Display adaptor propertiesfor Display *].
* is a displaynumber.
4. Touch [Monitor] - [Properties].
5. Touch [Driver] - [Update Driver].
CAUTION
n The screen may become distorted due to the following operations. In this case, restart the computer.
Disconnecting an external display for which you have set high resolution or high refresh rate.
Connecting/disconnecting an external displayduring computer operations.
To Change the Display Settings
1.
Touch on the task tray, and then touch (Intel® Graphics Settings) - [Intel® Graphics Settings].
Alternatively, touch and hold the desktop, and then touch [Intel® GraphicsSettings] in the desktop mode.
2. Touch [Display].
3. Set the display color and resolution etc.
4. Touch [Apply].
5. Touch [Yes].
- 83 -
To Next Page
Loading...
