Magnetic Stripe Card Reader
<Only for model with Magnetic Stripe Card Reader>
You need software to use a Magnetic Stripe Card Reader.
CAUTION
n Do not:
Hit, bend, or drop the card.
Touch the contact part with fingers or metalobject.
Place the card in veryhot location for a long time.
Remove the card immediately after inserting it.
Reading Magnetic Stripe Card
Insert the magnetic tape part of the card into this unit's card reading part and slide it.
Face the magnetictape of the card to the computer side.
You can slide the card from both sides to read.
N O T E
n Slide the card parallel to the rail.
n Slide the card at a constant speed.
n Inserting the card at an angle to slide or removing the card at an angle after insertion may lead to incorrect reading.
- 77 -
To Next Page
Loading...
