Set [USB selective suspend setting] to [Enabled].
1.
Touch (Settings) - [System] - [Power & sleep] - [Additional power settings].
Alternatively, touch (Start) - (Settings) - [System] - [Power & sleep] - [Additionalpower settings] in the desktop mode.
2. Touch [Change plan settings] of the current power plan.
3. Touch [Change advanced power settings].
4. In [Advanced settings], double-touch [USB settings].
5. Double-touch the displayed [USB selective suspend setting].
6. Change settings of [On battery] and [Plugged in] to [Enabled].
7. Touch [OK] and exit the “Power Options” screen.
About the Ambient Light Sensor
The ambient light sensor isused to adjust the display screen brightness automatically.
To configure the automatic adjustment function, proceed as follows.
1.
Touch (Settings) - [System] - [Display].
Alternatively, touch (Start) - (Settings) - [System] - [Display] in the desktop mode.
2. Add the check mark to [Change brightness automatically when lighting changes] under “Brightness and color”.
Windows Update
You can update to the latest patchesand service packs for Windows with the following menus.
1.
Touch (Settings) - [Update & Security] - [Windows Update].
Alternatively, touch (Start) - (Settings) - [Update & Security] - [Windows Update] in the desktop mode.
2. Touch [Check for updates].
Do not apply“Driver Updates” even if a message to update a driver appears. If a driver update is required, contact your technicalsupport office.
- 6 -
To Next Page
Loading...
