Using the hand strap
1. When using the computer holding with hand, insert your hand to the hand strap.
2. Fix the hand strap firmly so that the computer does not come off, and then turn it over.
3. <Only for FZ-VSTM12U/FZ-VSTM12AU> Adjust the angle of the hand strap if it is necessary.
CAUTION
n If the hand is not securely fixed to the hand strap, the computer may drop.
When the hand strap is too loose or too tight, you can adjust the hand strap according to the instructions below.
1. Remove (A) from the strap joint and next remove (B).
2. Move (B) and adjust the position (C).
3. Attach (B), then (A) to the joint.
Attach the hand strap firmlyso that the strap does not come off.
N O T E
n The dedicated pen (optional) can be stored in the hand strap as below.
- 104 -
To Next Page
Loading...
