Cradle
You can use an optional cradle. This device freesyou from being bothered by a lot of cable connectionswhen you carry the computer. It also allows you to
connect various peripherals.
Connect the cradle to the expansion bus connector (A) on the bottom side of the computer.
For further information, refer to the instruction manual of the cradle.
In combination of the computer and Cradle, you can connect varietyof devices.
Read operating instructionsfor each device carefullywhen connecting each device to the Cradle.
Names and Functions of Parts
Connecting/Disconnecting the Computer
Battery Charging
N O T E
n This manualis shared between FZ-VEBM11 seriesand FZ-VEBM12 series. Illustrations of FZ-VEBM12 series are used. For parts provided
onlyfor a specificmodel, the modelnumber isshown.
Names and Functions of Parts
CAUTION
n Do not touch the expansion bus connector or pins of the Cradle.
<Rear>
A. USB 3.0 ports (2 ports)
B. LAN Port
C. HDMI Port <Only for FZ-VEBM12 series>
Connector for HDMI compatible digital display.
It is not compatible with the analog display.
The displayspecifications of the maximum resolution, etc. that can be output differ according to the specifications of the device con-
nected. For details, refer to the specifications of the device connected.
D. VGA Port <Only for FZ-VEBM12 series>
E. SerialPort <Only for FZ-VEBM12 series>
It does not support serialmouse.
F. Security Slot (Rear)
A Kensington cable can be connected.
For more information, read the manualthat comes with the cable.
<Front>
- 97 -
To Next Page
Loading...
