When the latch (C) is slid with the AC adaptor disconnected
Battery indicator Battery status
Not lit The battery pack can be replaced
Lights in green The battery pack can be replaced
Blinks in red The battery pack cannot be replaced
When the latch (C) is not slid with the AC adaptor disconnected and without battery pack
Battery indicator Battery status
Lights in green Built-in bridge batterydischarges
While the AC adaptor connected, shutdown, hibernation
Battery indicator Battery status
Not lit The battery pack can be replaced
N O T E
n Once the battery is fullycharged, the computer performs recharging only when the battery level becomes less than approximately 95%, so over-
charging is avoided.
n When [LED] isset to [OFF] on the [Concealed Mode Configuration] menu, LED does not light.
Charging
When connecting the computer to a power outlet, the battery charging starts automatically.
The battery pack is not charged when you first purchase it. Be sure to charge it before using for the first time.
Checking the Remaining Battery Power
To check the remaining battery power on the screen
(After signing in to Windows)
1.
Touch or on the task tray.
The remaining batterypower is displayed.
N O T E
- 29 -
To Next Page
Loading...
