Panasonic FZ-M1 Series - Change the Settings

Concealed Mode
You can make your computer inconspicuously using the Concealed Mode.
You can select on/off of LCD backlight, LED, Sound, Wireless Radio, Camera Light, Camera Flash
*1
, Barcode Reader light
*2
and TouchScreen.
*1 : Onlyfor FZ-M1J-series models.
*2 : Onlyfor model with Barcode Reader.
CAUTION
n Concealed Mode is disabled as the factory default.
n The camera indicator cannot be turned off.
Switching the Concealed Mode
<Only when [Concealed Mode] is set to [Enabled]>
1.
Press .
N O T E
n
If you press in succession, the Concealed Mode may not be switched. More than 4 seconds interval is necessary to
switch on/off.
Disabling/Enabling the Concealed Mode
This function is effective when the computer is restarted.
1. Set [Concealed Mode] of [Concealed Mode Configuration] to [Enabled] or [Disabled] in the [Main] menu of the Setup Utility.
Change the settings
This function is effective when the computer is restarted.
1. You can change the devices turned on/off in [Concealed Mode Configuration] with Setup Utility. When Concealed Mode is enabled, the
button will be assigned as the Concealed Mode trigger key.
N O T E
n When set [LCD Backlight] to [Minimum] and [LED] to [ON], the LED may become dark.
- 58 -