Charging status indicator Battery status
Not lit The battery pack is not inserted or not being charged.
Orange Charging isin progress.
Green The battery is fully-charged.
Blinking red The batterypack or the charging circuit isnot operating properly.
Blinking orange The battery cannot be charged temporarily due to the following reasons:
Its internal temperature is out of the acceptable range.
The power supply is not enough because software applications or peripheraldevicesare consuming a
large amount of power.
N O T E
n If you set [Battery Charging Indicator] to [Flashing] on the [Main] Menu of Setup Utility, the charging status indicator of the cradle does not flash.
CAUTION
n Connect or disconnect the cradle while the computer power is turned off.
n To boot the computer from a USB opticaldrive, be sure to connect the USB drive to the USB port on the computer, not to the USB port on the
cradle.
- 101 -
To Next Page
Loading...
