3. Attach the Velcro tapes on the rear side of the computer.
Attach the tapes firmlyso that they do not come off.
N O T E
n If a high-capacity battery pack ismounted, adjust the Velcro tape position.
4. Attach the rear cover to the case body using the Velcro tapes.
Attach the tapes firmlyso that they do not come off.
N O T E
n If optional items are attached on the rear surface, adjust the Velcro tape position or do not attach the rear cover when using.
5. Attach the hand strap of the case body.
- 107 -
To Next Page
Loading...
