Coordinate and Size toolbar
The coordinates (upper-left corner) and sizes of the part selected on the base screen are
displayed here. You can also enter values to change them. As shown in the above figure, the
coordinates of the upper-left corner of the part selected in the active base screen window and
the sizes of this part are displayed here. You can change the position and sizes of the
selected part by setting the values here.
As shown in the above figure, if multiple parts are selected, values that are the same for all
the parts are displayed, and values that differ are displayed as blanks. You can change the
positions and sizes of all the selected parts by setting the values in this situation. If no parts
are selected, these fields are disabled.
Drawing toolbar
Drawing functions commonly used from the menu bar are displayed as icons.
Select character strings, graphics, and parts.
Draw a continuous straight line.
[Rectangle/Rounded Rectangle] icon
Draw a rectangle or a rounded rectangle.
Draw a circle or an oval.
Draw an arc or an arc of an oval.
[Circular/Oval Segment] icon
Draw a circular segment or a circular segment of an oval.
Fill an area enclosed by lines or graphics with color.
Read an image file into the screen being edited.
Display the attributes setting screen for the selected graphic.
Display the attributes setting screen for the selected
character string.
To Next Page
Loading...
