37
VQT3W38
Please refer to page 94.
When about 5 minutes have passed without any operation, this unit automatically turns off to
save battery life.
≥ This unit will not automatically turn off even if [ECONOMY (BATT)] is set to [ON] in
following cases:
jUsing the AC adaptor.
*
jUsing the USB cable for PC etc.
jPRE-REC is used
jDuring playback of the slide show
* The unit is turned off automatically when [ECONOMY (AC)] operates.
When about 30 minutes have passed without any operation while connecting AC adaptor
with this unit, this unit automatically turns off.
≥ This unit will not automatically turn off even if [ECONOMY (AC)] is set to [ON] in following
cases:
jUsing the USB cable for PC etc.
jPRE-REC is used
jDuring playback of the slide show
The unit is put into recording pause approx. 1 second when the unit is turned on with the
mode set to or .
≥ Depending on the recording conditions, start time may be longer than 1 second.
≥ In the quick power on mode, the zoom magnification becomes approx. 1k.
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥ When in quick start standby mode about 70% of the power used in recording pause
mode is being consumed, so the recording time will be reduced.
≥
Quick Start will not work if there is no SD card inserted.
≥
Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there
is no SD card inserted.
≥ Change the mode to or .
1 Set [QUICK START] to [ON].
[EXT. DISPLAY]
[SIMPLE]/[DETAIL]/[OFF]
[ECONOMY (BATT)]
[ON]/[OFF]
[ECONOMY (AC)]
[ON]/[OFF]
[QUICK POWER ON]
[ON]/[OFF]
[QUICK START]
[ON]/[OFF]
HC-V500&V500M-EB-VQT3W38_mst.book 37 ページ ２０１２年１月１３日 金曜日 午後９時４分
To Next Page
Loading...
