38
VQT3W38
2 Close the LCD monitor.
The status indicator A flashes green and the unit goes into
Quick Start standby mode.
≥ The lens cover does not close.
3 Open the LCD monitor.
The status indicator A lights red and the unit is put
into recording pause.
≥ Quick Start Standby Mode is cancelled if
jabout 5 minutes elapsed
jmode is set to
≥ Depending on the recording conditions and menu settings, time for Quick Start may be
longer than 0.6 seconds.
≥ It may take some time for Automatic White Balance to adjust.
≥ In the Quick Start Mode, the zoom magnification becomes approx. 1k.
≥ When it has gone into Quick Start Standby Mode automatically with the [ECONOMY
(BATT)] (l 37)/[ECONOMY (AC)] (l 37), close the LCD monitor once and open it again.
≥ Turn the unit off using the power button.
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed
with this sound.
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (l 127)
You can change the operation icons to display in the Touch Menu.
Register 3 favourite operation icons.
≥ The default settings are, (Fade), (PRE-REC) and (Video light) for Motion
Picture Recording Mode, and (Photo light), (Self-timer) and (Backlight
Compensation) for Still Picture Recording Mode.
1 Touch [SELECT OPERATION ICONS].
2 Touch the operation icon you would like to change to cancell the setting.
3 Touch the operation icon to be set.
≥ Name of the function is displayed by touching and holding on the operation icon.
≥ To cancel, touch the operation icon again.
4 Touch [ENTER].
≥ For details about the function of each operation icon, refer to page 49.
[ALERT SOUND]
/ /[OFF]
(Volume low)/ (Volume high)
[SELECT OPERATION
ICONS]
HC-V500&V500M-EB-VQT3W38_mst.book 38 ページ ２０１２年１月１３日 金曜日 午後９時４分
To Next Page
Loading...
