43
VQT3Y48
This item is used to start the unit demonstration.
(Only when the mode is at the or position)
If [DEMO MODE] is switched to [ON] and you touch [EXIT] when there is no SD card inserted
and while this unit is connected to the AC adaptor, the demonstration automatically starts.
If any operation takes place, the demonstration is cancelled. However if no operations take
place for approx. 10 minutes, the demonstration automatically starts again. To stop the
demonstration, set [DEMO MODE] to [OFF] or insert an SD card.
This item is used to start the Optical Image Stabilizer demo.
(Only when the mode is at the position)
Touch [O.I.S. DEMO], the demonstration automatically starts.
When you touch [EXIT], the demonstration will be cancelled.
You can select the language on the screen display and the menu screen.
[DEMO MODE]
[ON]/[OFF]
[O.I.S. DEMO]
[LANGUAGE]
HC-V700M&V700_EB-VQT3Y48_mst.book 43 ページ ２０１１年１２月２６日 月曜日 午前９時３６分
To Next Page
Loading...
