55
VQT3Y48
This is for recording still pictures using the timer.
Each time the icon is selected, the indication changes by one setting in the following order:
Ø10 (Records after 10 seconds) # Ø2 (Records after 2 seconds) # setting cancelled
≥ When you press the button, Ø10 or Ø2 flashes for the set period before a still picture
is recorded. After recording, the Self-timer is cancelled.
≥ In Auto Focus Mode, if the button is pressed halfway once and then fully, the lens
focuses on the subject when the button is pressed halfway. If the button is pressed
fully all at once, the lens focuses on the subject just before recording.
To stop the timer midway through
Touch [CANCEL].
≥ Setting the Self-timer to Ø2 is a good way to prevent image shake when the button is
pressed while using a tripod etc.
This brightens dark areas so the image can be recorded clearly.
≥ If there are extremely dark parts or the brightness is insufficient, the effect may not be
clear.
This makes the image brighter to prevent darkening of a backlit subject.
Self-timer
Intelligent Exposure
Backlight Compensation
HC-V700M&V700_EB-VQT3Y48_mst.book 55 ページ ２０１１年１２月２６日 月曜日 午前９時３６分
To Next Page
Loading...
