To Next PageTo Next PageWhat to do if my Panasonic HC-WX970HC-V770M unit cannot be operated even though it is turned on?
If your Panasonic Camcorder is on but not operating correctly, remove the battery or AC adapter, wait about a minute, and then reconnect it. Wait another minute, and turn the unit on again. If normal operation is still not restored, detach the power connected, and consult the dealer who you purchased this unit from.
Why is my Panasonic HC-WX970HC-V770M not detected by the PC when connected via USB?
If your Panasonic Camcorder is not detected by your PC when connected via USB cable: * Re-insert the SD card into the unit, then reconnect the supplied USB cable. * Try a different USB terminal on your PC. * Check the operating environment. After restarting the PC and the camcorder, reconnect the USB cable.
Why are images or sounds not output when my Panasonic HC-WX970HC-V770M Camcorder is connected to a TV?
If the images or sounds are not output even when your Panasonic Camcorder is correctly connected to a TV, or if the images appear squeezed horizontally: * Consult your TV's operating instructions to select the channel that corresponds to the input used for the connection. * Adjust the [TV ASPECT] setting to match the aspect ratio of your TV. * Note that during playback mode, audio is not output from the camcorder itself; adjust the sound on the TV.
What to do if my Panasonic Camcorder is not detected by the PC when connected by the USB cable?
If your Panasonic Camcorder is not detected by the PC, try the following steps: * Re-insert the SD card into the unit, then reconnect the supplied USB cable. * Try a different USB terminal on your PC. * Ensure that your operating environment is supported. * Restart your PC and the camcorder, then reconnect the USB cable.
What to do if my Panasonic HC-WX970HC-V770M Camcorder images or sounds are not output even when correctly connected to a TV?
If images or sounds are not output when your Panasonic Camcorder is connected to a TV, consult your TV's operating instructions to select the correct channel that matches the input used for the connection. Also, adjust the [TV ASPECT] setting to match the aspect ratio of your TV. Note that during playback mode, audio is not output from the camcorder, so adjust the sound on the TV itself.
How to fix a Panasonic HC-WX970HC-V770M that won't turn on or has short battery life?
If your Panasonic Camcorder doesn't turn on, doesn't stay on long, or the battery drains quickly, ensure the battery is fully charged. In cold environments, battery life decreases. Batteries have a limited lifespan; if it still drains quickly after a full charge, it likely needs replacing.
Why is there no image or sound when my Panasonic HC-WX970HC-V770M Camcorder is connected to the TV?
If your Panasonic Camcorder is connected to a TV but you're not getting any images or sound, first consult your TV's operating instructions to select the correct input channel. If the images appear squeezed horizontally, adjust the [TV ASPECT] setting on the camcorder to match the TV's aspect ratio. Note that during playback, sound levels are controlled by the TV, not the camcorder.
What to do if my Panasonic Camcorder is not operating normally?
If your Panasonic Camcorder is on but not responding, try removing the battery or AC adapter, waiting about a minute, and then reconnecting it. After another minute, power the unit on again. Note that doing this while the media is being accessed could damage the data. If the issue persists, disconnect the power and consult the dealer from whom you purchased the camcorder.
What to do if my Panasonic HC-WX970HC-V770M is on but not working?
If your Panasonic Camcorder is not operating normally or cannot be operated even when turned on, remove the battery or AC adapter, wait about 1 minute, and then reconnect it. Wait another minute before turning the unit on again. If the issue persists, disconnect the power and consult the dealer from whom you purchased the unit.
Why does my Panasonic HC-WX970HC-V770M turn off automatically?
If your Panasonic Camcorder is turning off automatically, it might be due to the VIERA Link feature. If you're not using VIERA Link, disable it in the settings by setting [VIERA Link] to [OFF].
General| Optical Zoom | 20x |
|---|---|
| LCD Monitor Resolution | 460, 800 dots |
| Touch Panel | Yes |
| Recording Media | SD/SDHC/SDXC Memory Card |
| Microphone | Stereo |
| Wi-Fi Standard | IEEE 802.11b/g/n |
| Wi-Fi | Yes |
| NFC | Yes |
| Sensor Size | 1/2.3 inch |
| LCD Monitor Size | 3.0 inch |
| Recording Format | AVCHD, MP4 |
| Video Compression Format | MPEG-4 AVC/H.264 |
| Audio Recording Format | Dolby Digital (2ch), AAC (2ch) |
| HDMI | Yes |
| USB | Yes (Micro USB) |
| Video Resolution | 1920 x 1080 |
