Panasonic JU-253-T

Base Assembly
Drive Motor Assembly
Fig.12-14. Removing the Drive Motor Assembly
12.15 Disassembling and Reassembling the
Mounting Bracket Assembly
(1) Press the collar bracket from beneath the
mounting bracket assembly with a minus
screwdriver, then the collar bracket and washer
are removed from the holes in the mounting
bracket.
(2) Reassemble the mounting bracket assembly in
the reverse order of step (1).
Mounting Bracket
(Right)
~
'
I
I
~
Washer Bracket
~ Collar Bracket
~
I
I"
Mounting Bracket
(Left)
I
®
I
Fig. 12-15. Disassembling the Mounting Bracket
12.16 Removing and Remounting the Pushbutton
(1) Pull down the pushbutton with its hook and
remove the pushbutton from the eject lever.
Push ®with flat blade screwdriver while pull-
ing out.
(2) Remount the pushbutton in the reverse
procedure of step (1).
Push~~
j
Fig. 12-16. Removing the Pushbutton
12.17 Disassembling and Reassembling the Holder
Assembly
(1) Remove the hooks of the shutter lever spring
from the shutter lever assembly and from the
holder.
- 27 -