10.3 Replacing the Rollers
As a rough guideline, we recommend replacing the paper feed roller and double feed prevention roller
module after scanning 700,000 sheets of paper. This includes the number of sheets fed using Count Only
Mode. ("700,000 sheets" is based on scanning high-quality woodfree papers and cleaning the rollers
periodically. Depending on the type of paper, the roller cleaning interval, and the actual usage environment,
the actual life span of the rollers may be reduced.)
In User Utility, you can check the number of sheets that have been scanned. As for KV-S5078Y, you can
check it from the operation panel too. Refer to "Counter" (page 36).
Notice
• Be careful not to damage any parts of the unit.
1. Turn OFF the unit's power (page 38).
2. Open the ADF door (page 39).
3.
Move the lever ( ) of the paper feed roller module in the order indicated by the arrow ( , ), and then
pull out the module towards you.
4. Open the "Roller exchange kit (KV-SS068)" (sold separately) and take out the new paper feed roller
module.
10.3 Replacing the Rollers
104
To Next Page
Loading...
