Panasonic KX-FP365CX

103
KX-FP365CX / KX-FM388CX
12.5.3. Troubleshooting Items Table
ITEM SYMPTOM REFERENCE
ADF
(Auto Document Feeder)
The document does not feed. See
No Document Feed (P.105)
Document jam See
Document Jam (P.106)
Multiple feed See
Multiple Document Feed (P.107)
Skew See
Document Skew (P.108)
Recording paper feed The recording paper does not feed. See
The Recording Paper does not Feed (P.109)
Paper jam See
Paper Jam (P. 11 0 )
Multiple feed and skew See
Recording Paper Multiple Feed and Skew (P. 111 )
Printing The sent fax data is skewed. See
The Sent Fax Data is Skewed (P.111 )
The received fax data is skewed. See
The Received Fax Data is Skewed (P. 111 )
The received or copied data is expanded. See
Received or Copied Data is Expanded (P. 11 2 )
A black page is copied. See
A Blank Page is Copied (P. 11 3 )
A blank page is received. See
A Blank Page is Received (P. 11 5)
Black or white vertical line See
Black or White Vertical Line (P. 11 5)
Black or white lateral line on print out See
Black or White Lateral Line on Print Out (P. 11 6 )
An abnormal image is printed See
An Abnormal Image is Printed (P. 11 7 )
Communication
FAX, TEL
(Analog board)
Cannot communicate by fax.
An error code is displayed.
See Communication Section (P.90) and Journal Report
(P.77)
Cannot talk.
The DTMF tone doesn’t work.
The handset / monitor doesn’t work, etc.
See Analog Board Section (P.125)
Operation panel Keys are not accepted. See Operation Panel Section (P.132)
Sensor If the electric circuit is the cause, the error
message corresponding to the sensor will
be displayed.
See
Sensor Section (P.133)