158
KX-FP365CX / KX-FM388CX
15.2. Gear Section
15.2.1. Gear Operation
Once a mode is selected, the Drive Motor Gear rotates clockwise (CW) and then the controlling positions of Swing Gears A, B
and C determine which gears convey their drive power in each mode. See “Sensor Location” in Sensors and Switches
(P.33).
15.2.1.1. Transmit Mode
The TX MOTOR rotate CCW and conveys its power to the document separation roller gear and document Exit Roller Gear.
15.2.1.2. Paper Pick up and Paper Exit Mode
The RX MOTOR rotate CCW and swing Gear B engages Gear C, and conveys its power to the Pickup Roller Gear.
The Swing Gear B engages Gear D, and conveys its power to the Exit Roller Gear.
To Next Page
Loading...
