59
KX-FP365CX / KX-FM388CX
8.4. Installing the Paper Tray
Insert the tabs ( ) on the paper tray ( ) into the slots on
the back of the unit ( ).
8.5. Paper Support
Insert the recording paper support ( ) into the slot to the right
of the recording paper exit ( ). then into the left slot ( ).
8.6. Installing the Recording Paper
The unit can hold up to 50 sheets of 64 g/m
2
to 80 g/m
2
paper.
1. Fan the paper to prevent paper jams.
2. Pull the tension plate forward ( ) and insert the paper
gently, print-side down ( ).
• The paper should not be over the tab ( ).
• If the paper is not inserted correctly, remove all of the
installed paper, and re-install it gently. Otherwise the
paper may jam.
Note:
• Remove all of the installed paper before adding paper.