58
KX-FP365CX / KX-FM388CX
4. Insert the blue gear of the ink film roll into the front left slot
of the unit ( ) and the white gear of the ink film roll into
the rear left slot of the unit ( ).
• The ink film is safe to touch and will not rub off on your
hands like carbon paper.
• Make sure the blue gear ( ) and white gear ( ) are
installed as shown.
5. Turn the blue gear ( ) in the direction of the arrow until
the ink film is tight ( ) and at least one layer of ink film is
wrapped around the blue core ( ).
6. Close the back cover securely by pushing down on the
dotted area at both ends ( ).
7. Close the front cover securely.
To Next Page
Loading...
