TEMPLATE FOR WALL MOUNTING
1. Copy or print this template and place it on the
wall.
2. Install the screws as marked. If you mount the
main unit on a concrete, fit anchor plugs (not
included) into the wall beforehand.
3. Hook the unit onto the screw heads.
Note
• Make sure to set the print size to correspond
with the size of this page.
• If the dimensions of the paper output still
deviate slightly from the measurements
indicated here, use the measurements
indicated here.
A 225mm (8-7 / 8 in)
(1) Install a screw here.
Note
Getting Started 113
To Next Page
Loading...
