Panasonic KX-HTS824 - Page 73

Terminal
KX-HDV series KX-NTV series 3rd party SIP
KX-HTS
Setup/
preparation
1. Set the DHCP Mode
of KX-HTS series LAN
side to Server.
Refer to 3.3.1 Network
Configuration—[4-2]
LAN—LAN Settings—
DHCP Mode in
Programming Item
List.
1. Enter your password to Registration Password of the
SIP extension port.
Refer to “2.3.1 PBX Configuration—[2-1] Extension
—Port-SIP Extension—Registration Password” in
Programming Item List.
2. Connect KX-HTS series LAN port to existing LAN network.
Terminal
Setup/
preparation
3. Initialize the KX-HDV
series terminal. For
further information,
refer to the KX-HDV
series manual.
3. In the web settings of
KX-NTV series, set
the KX-HTS LAN IP
address and
Registration
Password.
3. In the web settings of
3rd party SIP terminal,
set KX-HTS LAN IP
address and
Registration
Password.
4. Connect KX-HDV
series to existing LAN
network.
4. Connect KX-NTV
series to existing LAN
network.
4. Connect 3rd party SIP
terminal to existing
LAN network.
Remarks KX-HDV series is
automatically registered to
the extension port with SIP
extension port attribute.
*1
The terminal is registered to the SIP extension port to
which the Registration Password is entered.
*1
• Connect an existing LAN to the WAN port of HTS.
• Connect the IP extension, Communication IP Camera/Video doorphone, and 3rd party SIP to an existing
LAN port, and connect it to KX-HTS.
3.5.1 Connecting SIP Extensions
Getting Started 73