Connecting Door Openers
1. Use a flathead screwdriver to press and hold open the button below the terminal, and insert the wire
coming from the door opener into the terminal.
A Door Opener 1
B Door Opener 2
To the door openers
2. Wrap the strap around all of the cords. (For details, refer to "3.2.6 Securing the Cables".)
Note
• We recommend using UL1015 wire or an equivalent for wiring.
For users in except in U.S.A.
– The wire should be between 0.45 mm and 1.1 mm in diameter excluding the coating.
For users in U.S.A only
– We recommend using UL1015, 26 AWG to 22 AWG, or an equivalent wire for wiring.
3.6 Connecting Doorphones and Door Openers
Getting Started 83
To Next Page
Loading...
