• Using a Manager Extension, you can use special number operations to set whether or not to connect to
the Web-MC remotely. For more information, refer to 2.1.2 Programming by Dial for Manager in Feature
Manual.
• Ports for remote maintenance close automatically after 24 hours have passed.
• A login ID and password must be set in order to log in.
• The same user cannot log in multiple times simultaneously. Should the same user perform a login
operation while they are already logged in, they will be forcibly logged out of their previous session and
will have to log in again.
• When multiple users perform settings for the same settings items, the data set later on will be enabled.
• After logging into the Web-MC, should no operation be performed for a fixed amount of time (Default: 120
minutes), the user will be automatically logged out.
• This time limit for no operation can be changed from the Web-MC. For more information, refer to 4.2
Maintenance—[1] Management-1.Web Programming-Web Programming-Web Auto Logout Duration in
Programming Item List.
3.9.4 Programming the PBX
Getting Started 91
To Next Page
Loading...
