Panasonic KX-NCP1000 - Page 232

Default
400 ms
Value Range
None, 6.5 ms, 8 ´ n (n=1–112) ms
Maintenance Console Location
3.28 [1-1] Slot—Port Property - LCO Port
Programming Manual References
None
Feature Manual References
3.1.22 CPC (Calling Party Control) Signal Detection
DTMF Width
Selects the length of the DTMF tone sent to the analog CO line.
Default
80 ms
Value Range
80 ms, 160 ms
Maintenance Console Location
3.28 [1-1] Slot—Port Property - LCO Port
Programming Manual References
None
Feature Manual References
None
Pulse Speed
Selects the speed at which pulse dials are sent to the analog CO line.
Default
Low
Value Range
Low, High
232 PC Programming Manual Document Version 2009-12
3.28 [1-1] Slot—Port Property - LCO Port