Panasonic KX-NCP1000 - 3-5-2] Incoming Call Distribution Group-Queuing Time Table

5.14 [3-5-2] Incoming Call Distribution Group—
Queuing Time Table
A Queuing Time Table can contain up to 16 sequences which control how calls waiting in a queue are handled.
A maximum of 64 Queuing Time Tables can be programmed.
Queuing Sequence—Sequence 01–16
Specifies the command activated by the corresponding sequence.
Default
None
Value Range
None: Redirects the call to the next sequence.
Overflow: Redirects the call to the overflow destination when there is no answer.
Disconnect: Disconnects the line.
Sequence 01–16: Redirects the call to a different sequence.
Wait 5 ´ n (n=1–16) s: If preceded by an OGM, plays the Music on Hold for the specified period of time; if not
preceded by an OGM, sends a ringback tone for the specified period of time.
OGM 01–64: Sends a certain OGM.
Maintenance Console Location
5.14 [3-5-2] Incoming Call Distribution Group—Queuing Time Table
Programming Manual References
None
Feature Manual References
11.1.4 Music on Hold
12.1.2 OGM (Outgoing Message)
9.1.5 ICD Group Features—Overflow
9.1.6 ICD Group Features—Queuing
Document Version 2009-12 PC Programming Manual 499
5.14 [3-5-2] Incoming Call Distribution Group—Queuing Time Table