Panasonic KX-NCP1000 - Co Line Call Limitation

• 3.34 [1-1] Slot—Port Property - T1 Port— Connection
• 4.9 [2-6-1] Numbering Plan—Main—Features
– Idle Line Access (Local Access)
– Trunk Group Access
– Single CO Line Access
• 4.13 [2-7-2] Class of Service—External Call Block
• 5.1 [3-1-1] Trunk Group—TRG Settings—Main— Line Hunting Order
• 5.2 [3-1-2] Trunk Group—Local Access Priority
• 6.5 [4-1-4] Wired Extension—Flexible Button
– Type
– Parameter Selection (for Single CO)
– Parameter Selection (for Group CO)
• 6.13 [4-2-3] Portable Station—Flexible Button
– Type
– Parameter Selection (for Single CO)
– Parameter Selection (for Group CO)
• 6.17 [4-3] DSS Console
– Type
– Parameter Selection (for Single CO)
– Parameter Selection (for Group CO)
• 10.1 [8-1] System Setting— ARS Mode
• 12.1 [10-1] CO Line Settings— CO Name
Feature Manual References
3.1.16 CO Line Access
CO Line Call Limitation
• 4.12 [2-7-1] Class of Service—COS Settings—CO & SMDR— Extension-CO Line Call Duration Limit
• 4.18 [2-9] System Options—Option 2— Extension - CO Call Limitation—For Incoming Call
• 5.1 [3-1-1] Trunk Group—TRG Settings—Main
– CO-CO Duration Time (*60s)
– Extension-CO Duration Time (*60s)
• 9.5 [7-5] Miscellaneous— Dial Digits Limitation After Answering—Dial Digits
Feature Manual References
3.1.17 CO Line Call Limitation
Conference
• 4.5 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf
– Unattended Conference—Recall Start Timer
– Unattended Conference—Warning Tone Start Timer
– Unattended Conference—Disconnect Timer
• 4.12 [2-7-1] Class of Service—COS Settings—CO & SMDR— Transfer to CO
• 4.18 [2-9] System Options—Option 3
– Confirmation Tone—Tone 4-1 : Start Conference
– Confirmation Tone—Tone 4-2 : Finish Conference
Document Version 2009-12 PC Programming Manual 857
14.2 Feature Programming References