8.1 [6-1] System Speed Dial
The System Speed Dialing Table is used to store frequently dialed numbers as well as callers who should be
automatically routed to certain extensions when they call (Calling Line Identification [CLI] distribution). The
System Speed Dialing Table is available for all extension users when making or receiving a call.
A maximum of 1000 System Speed Dialing numbers (e.g., telephone numbers, feature numbers) can be
programmed with other related parameters. 100 numbers are displayed at a time. To display other sets of
numbers, click the applicable tab.
Memory
Selects the System Speed Dialing Table to be programmed. Whether a tenant uses the basic System Speed
Dialing Table or the additional table depends on the setting of
System Speed Dial in 8.6 [6-6] Tenant.
Default
Basic Memory
Value Range
Basic Memory: the standard table
Expansion for Tenant 1–8: additional tables
Maintenance Console Location
8.1 [6-1] System Speed Dial
Programming Manual References
8.6 [6-6] Tenant— System Speed Dial
Feature Manual References
16.1.7 Speed Dialing, System
17.1.3 Tenant Service
Name
Specifies a name for the System Speed Dialing number.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
8.1 [6-1] System Speed Dial
Programming Manual References
None
732 PC Programming Manual Document Version 2009-12
8.1 [6-1] System Speed Dial
To Next Page
Loading...
