Panasonic KX-NCP1000 - Quick Dialing; Ring Tone Pattern Selection; Room Status Control

Q
Quick Dialing
• 4.10 [2-6-2] Numbering Plan—Quick Dial
Feature Manual References
14.1.1 Quick Dialing
R
Redial, Last Number
• 4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
– Automatic Redial—Repeat Counter
– Automatic Redial—Redial Call Ring Duration
– Automatic Redial—Analog CO Mute / Busy Detection Timer
• 4.9 [2-6-1] Numbering Plan—Main—Features— Redial
• 4.18 [2-9] System Options—Option 2
– Redial—Automatic Redial when No Answer (ISDN)
– Redial—Save Dial After Connection to Redial Memory
– Redial—Call Log by Redial key
• 6.1 [4-1-1] Wired Extension—Extension Settings—Option 7— Outgoing Call Log Memory
• 6.10 [4-2-1] Portable Station—Extension Settings—Option 7— Outgoing Call Log Memory
Feature Manual References
15.1.1 Redial, Last Number
Ring Tone Pattern Selection
• 4.15 [2-8-1] Ring Tone Patterns—Call from CO— Ring Tone Pattern Plan 1–8
• 4.16 [2-8-2] Ring Tone Patterns—Call from Doorphone— Ring Tone Pattern Plan 1–8
• 4.17 [2-8-3] Ring Tone Patterns—Call from Others— Extension—Ring Tone Pattern Plan 1–8
• 4.18 [2-9] System Options—Option 1— PT Operation—PT Ring Off Setting
• 6.1 [4-1-1] Wired Extension—Extension Settings—Option 1— Ring Pattern Table
• 6.10 [4-2-1] Portable Station—Extension Settings—Option 1— Ring Pattern Table
Feature Manual References
15.1.2 Ring Tone Pattern Selection
Room Status Control
• 6.5 [4-1-4] Wired Extension—Flexible Button— Type
• 6.17 [4-3] DSS Console— Type
• 8.2 [6-2] Hotel—Main— Hotel Operator—Extension 1–4
Feature Manual References
15.1.3 Room Status Control
Document Version 2009-12 PC Programming Manual 883
14.2 Feature Programming References