Panasonic KX-NCP1000 - Page 423

Feature Manual References
15.1.1 Redial, Last Number
Redial—Call Log by Redial key
Enables display of the Outgoing Call Log on a DPT by pressing the REDIAL button while on hook.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Manual References
15.1.1 Redial, Last Number
Extension - CO Call Limitation—For Incoming Call
Selects whether the time limit for extension-to-CO line calls applies to outgoing calls only or for both outgoing
and incoming calls. COS determines the use of this feature, and the length of the time limit can be assigned
on a trunk group basis.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
4.12 [2-7-1] Class of Service—COS Settings—CO & SMDR—
Extension-CO Line Call Duration Limit
5.1 [3-1-1] Trunk Group—TRG Settings—Main— Extension-CO Duration Time (*60s)
Feature Manual References
3.1.17 CO Line Call Limitation
Document Version 2009-12 PC Programming Manual 423
4.18 [2-9] System Options