Panasonic KX-NCP1000 - 10-3] DID Table-Name Generate

12.5 [10-3] DID Table—Name Generate
Name Generate allows DID names to be programmed at once for a set of locations in series.
If a name generated here is longer than 20 characters, the additional characters will be discarded.
Beginning Entry Location
Specifies the number of the first location to be programmed.
Default
1
Value Range
1–1000
Maintenance Console Location
12.5 [10-3] DID Table—Name Generate
Programming Manual References
12.3 [10-3] DID Table
Feature Manual References
4.1.6 DID (Direct Inward Dialing)
Number to Generate
Specifies the number of locations to be programmed.
Default
Not stored.
Value Range
1–1000
Maintenance Console Location
12.5 [10-3] DID Table—Name Generate
Programming Manual References
12.3 [10-3] DID Table
Feature Manual References
4.1.6 DID (Direct Inward Dialing)
802 PC Programming Manual Document Version 2009-12
12.5 [10-3] DID Table—Name Generate