Panasonic KX-NCP1000 - Page 243

Programming Manual References
None
Feature Manual References
None
ISDN CO / QSIG Master / QSIG Slave—T319
Specifies the maximum time that the PBX waits for a reply after sending the Suspend message.
Default
0 ´ 100 ms
Value Range
0–600 ´ 100 ms
Maintenance Console Location
3.30 [1-1] Slot—Card Property - PRI type
Programming Manual References
None
Feature Manual References
None
ISDN CO / QSIG Master / QSIG Slave—T322
Specifies the maximum time that the PBX waits for a reply after sending the Status enquiry message.
Default
40 ´ 100 ms
Value Range
0–600 ´ 100 ms
Maintenance Console Location
3.30 [1-1] Slot—Card Property - PRI type
Programming Manual References
None
Feature Manual References
None
Document Version 2009-12 PC Programming Manual 243
3.30 [1-1] Slot—Card Property - PRI type