Panasonic KX-NCP1000 - Page 256

Feature Manual References
None
Line Coding
Selects the line coding type of the PRI PCM (Pulse Code Modulation) for the port.
Default
B8ZS
Value Range
B8ZS, AMI
Maintenance Console Location
3.31 [1-1] Slot—Port Property - PRI Port
Programming Manual References
None
Feature Manual References
None
Frame Sequence
Selects the type of frame sequence for the port.
Default
Extend Multi frame (ESF)
Value Range
Extend Multi frame (ESF), 4-Frame Multi frame (F4), 12-Frame Multi frame (F12)
Maintenance Console Location
3.31 [1-1] Slot—Port Property - PRI Port
Programming Manual References
None
Feature Manual References
None
CO Setting
CO Setting parameters are not applicable to ports assigned as Extension in
Port Type.
256 PC Programming Manual Document Version 2009-12
3.31 [1-1] Slot—Port Property - PRI Port