Panasonic KX-NCP1000 - Page 272

Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
3.31 [1-1] Slot—Port Property - PRI Port
Programming Manual References
None
Feature Manual References
None
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, E911
Specifies whether each ISDN or QSIG supplementary service is used.
The available services depend on the setting of Port Type on this screen.
When using the Centralized VM feature, set CF (Rerouting) to "No".
Default
CLIR, E911: Yes
Other services: No
Value Range
No, Yes
Maintenance Console Location
3.31 [1-1] Slot—Port Property - PRI Port
Programming Manual References
None
Feature Manual References
3.1.15 CLIP (Calling Line Identification Presentation)
13.1.21 Private Network Features—QSIG—CCBS (Completion of Calls to Busy Subscriber)
13.1.22 Private Network Features—QSIG—CF (Call Forwarding)
13.1.23 Private Network Features—QSIG—CLIP/COLP (Calling/Connected Line Identification Presentation)
and CNIP/CONP (Calling/Connected Name Identification Presentation)
13.1.24 Private Network Features—QSIG—CT (Call Transfer)
272 PC Programming Manual Document Version 2009-12
3.31 [1-1] Slot—Port Property - PRI Port