This column offers two ways to open the screen to select the channel command:
• Click the desired cell in the column.
• Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The channel is in service.
OUS: The channel is out of service.
Fault: The channel is not communicating with the network.
Maintenance Console Location
3.34 [1-1] Slot—Port Property - T1 Port
Programming Manual References
None
Feature Manual References
None
Subscriber Number
Specifies the number used as the CLIP number.
Default
Not stored.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
3.34 [1-1] Slot—Port Property - T1 Port
Programming Manual References
None
Feature Manual References
3.1.15 CLIP (Calling Line Identification Presentation)
CO Dial Mode
Selects the type of signal used to dial out to a CO line.
Default
DTMF
Document Version 2009-12 PC Programming Manual 287
3.34 [1-1] Slot—Port Property - T1 Port
To Next Page
Loading...
