• The following features cannot be used when a sensor call is received:
– Alternate Receiving—Voice (®
1.5.3 Intercom Call)
– Hands-free Answerback (® 1.4.1.4 Hands-free Answerback)
– Consultation Hold/Call Hold (® 1.13.1 Call Hold)
– Call Transfer (® 1.12.1 Call Transfer)
– Executive Busy Override (® 1.8.2 Executive Busy Override)
• Sensor call information is output on SMDR.
Installation Manual References
KX-TDE100/KX-TDE200
3.7.1 OPB3 Card (KX-TDA0190)
3.7.4 EIO4 Card (KX-TDA0164)
3.12.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
KX-TDE600
3.9.1 OPB3 Card (KX-TDA0190)
3.9.4 EIO4 Card (KX-TDA0164)
3.11.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
PC Programming Manual References
3.58 [1-1] Slot—OPB3 Card Property
→
Input Signal Decision Time
→ Input Signal Detection Reopening Time
4.5 [2-3] Timers & Counters—Miscellaneous— External Sensor—Ring Duration
4.17 [2-8-3] Ring Tone Patterns—Call from Others— External Sensor—Ring Tone Pattern Plan 1–8
7.7 [5-5] External Sensor
212 Feature Guide
1.17.8 External Sensor
To Next Page
Loading...
