1.31.4 Self Labelling (KX-NT366 only)
Description
The KX-NT366 IP-PT features 12 flexible buttons, with an LCD screen next to the buttons. Each item can be
named on the LCD screen through personal/system programming to reflect the function of its corresponding
flexible
button.
Additionally, the flexible buttons can be organised into 4 "pages", allowing you to assign a total
of 48 items to the 12 flexible buttons. You can toggle between pages by pressing the NEXT PAGE key, as
follows:
NEXT PAGE is pressed
Bank
Home
London offc.
NY offc.
Sales
Chris Walace
Andre Romel
Sean Carter
Keith Murray
Log-in/out
LCS
CO 13
CO 12
CO 11
CO 10
CO 09
CO 08
CO 07
CO 06
CO 05
CO 04
CO 03
CO 02
CO 01
Conditions
• Up to 12 characters can be assigned to the LCD of each flexible button through personal/system
programming.
• When an
incoming trunk call is answered or a trunk is seized, the corresponding CO button will turn Green
and the LCD display will switch to the page that the corresponding CO button is registered in.
• It is not recommended to assign the System Alarm button when using this feature, because if an alarm
occurs when the System Alarm button is not on the visible page, the alarm will not be noticed.
PC Programming Manual References
6.5 [4-1-4] Wired Extension—Flexible Button—
Label Name
Feature Guide References
1.20.2 Flexible Buttons
386 Feature Guide
1.31.4 Self Labelling (KX-NT366 only)
To Next Page
Loading...
