2.3.4 Quick Setup
Description
It is possible to set up the basic PBX parameters using a PC. When a PC accesses the PBX for the first time
with the Installer Level Programmer Code (® 2.3.1 PC Programming), Quick Setup display will appear
automatically. The following items can be programmed as desired:
Item Parameter Description
Date & Time Year/Month/Date/Hour/
Minute
The date and time set on the PC will be used.
System Password 4–10 characters
Enter the system password for installer (®
2.3.3 Password Security).
Manager Extension
and Operator
Extension Number
Assign an extension as a manager extension (®
2.2.6 Manager Features) and an extension as a PBX
operator (® 2.2.5 Operator Features).
Flexible Numbering
—Feature
1. Type 1
(with
)
2. Type 2
(without )
If "Type 1 (with
)" is selected, " " must prefix all
feature numbers (except access numbers) when an
extension user wants to use a feature.
[Example] Call Pickup feature number
Type 1 (with ): 41
Type 2 (without ): 41
For default
of the flexible numbers, refer to the [Flexible
Numbering Table (available while a dial tone is heard)]
(® 2.3.6 Flexible Numbering/Fixed Numbering).
Flexible Numbering
—Extension
KX-TDE100/KX-TDE200:
from 101/from 201
KX-TDE600:
from 1001/from 2001
Determines the number from which default extension
numbers begin.
Flexible Numbering
—Operator
0/9 The feature number for Operator Call can be selected.
Flexible Numbering
—CO Access
0/1/9 The feature number for Idle Line Access can be
selected.
DHCP Client Enable/Disable Determines whether to use a DHCP server to assign
IP address information automatically or not.
LAN Connection
*1
• IP Address for
IPCMPR/IPCEMPR
Card
• IP Address for
VoIP-DSP
• Subnet Mask
• Default Gateway
Manually enter the LAN information when not using a
DHCP server.
Virtual Card – Select whether to install a V-IPEXT, V-SIPEXT, or
V-SIPGW card.
*1
If the DHCP Client setting is set to Enable, this parameter can not be set.
Note that the programmable items may vary depending on the version of Maintenance Console being used.
422 Feature Guide
2.3.4 Quick Setup
To Next Page
Loading...
