2. If the specified verification code applies COS 2 of PBX-2, the call is connected to the outside party
through PBX-2, because COS 2 is not blocked from accessing TRG 3 of PBX-2.
c. Override using an Itemised Billing Code for ARS
By assigning an Itemised Billing Code for ARS to PBX-1, an extension's verification code can be sent to
PBX-2 automatically, without the extension having to dial the verification code.
® 6.1 [4-1-1] Wired Extension—Extension Settings—Option 1— ARS Itemised Code
® 6.10 [4-2-1] Portable Station—Extension Settings—Option 1—
ARS Itemised Code
® 10.6 [8-5] Carrier
Note
When the number dialled after ARS modification is over 20 digits:
– With
the
VoIP interface, this feature can be available if the software of the IP-GW card is upgraded.
334 Feature Guide
1.30.1 TIE Line Service
To Next Page
Loading...
