Pattern 11
Pattern 12
ON
OFF
ON
OFF
t=1.28 s
10.24 s 10.24 s 20.48 s
t
t=1.28 s
10.24 s 10.24 s 20.48 s
t
• It is possible to set Message Waiting while hearing a ringback tone, busy tone, or DND tone.
• Messages are
always left on the original destination extension, regardless of that extension’s FWD settings.
• Both the extension that sent and received a message waiting notification can cancel the left message.
• If the extension that received a notification calls back the extension that sent the notification, and the call
is answered, the notification will be cleared automatically. However, if a voice message has been left on
the VPS, whether the notification is cleared or not depends on the VPS settings.
• If a voice message has been left on the VPS for a SIP extension (except KX-HGT100), the lamp will not
turn on.
Installation Manual References
KX-TDE100/KX-TDE200
3.6.7 SLC16 Card (KX-TDA0174), MSLC16 Card (KX-TDA0175), and CSLC16 Card (KX-TDA0177)
KX-TDE600
3.8.7 CSLC16 Card (KX-TDA0177), ESLC16 Card (KX-TDA6174), EMSLC16 Card (KX-TDA6175), and
ECSLC24 Card (KX-TDA6178)
PC Programming Manual References
3.23 [1-1] Slot—Card Property - Extension Type—
SLT Power Supply
4.9 [2-6-1] Numbering Plan—Main—Features— Message Waiting Set / Cancel / Call Back
4.11 [2-6-3] Numbering Plan—B/NA DND Call Feature— Message Waiting Set
4.18 [2-9] System Options
→Option 3— Dial Tone—Distinctive Dial Tone
→Option 5— SLT—Message Waiting Lamp Pattern
5.22 [3-8-1] VM(DTMF) Group—System Settings— VM DTMF Command—Listening Message
6.1 [4-1-1] Wired Extension—Extension Settings—Option 8— SLT MW Mode
6.5 [4-1-4] Wired Extension—Flexible Button— Type
6.13 [4-2-3] Portable Station—Flexible Button— Type
6.17 [4-3] DSS Console— Type
Feature Guide References
1.20.2 Flexible Buttons
3.1 Capacity of System Resources
Feature Guide 223
1.19.1 Message Waiting
To Next Page
Loading...
