EasyManua.ls Logo

Panasonic KX-NCP1000 - Call Forwarding (CF)-By QSIG

Panasonic KX-NCP1000
468 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.31 IP Telephone Features
1.31.1 IP Proprietary Telephone (IP-PT)
Description
This PBX supports the connection of IP-PTs, which function almost identically to normal PTs. However, they
connect to the PBX over a LAN, and make and receive calls using IP.
IP-PTs have
two Ethernet ports for connection, primary and secondary. They are connected to the PBX through
a network hub or other splitting device, and can have a PC connected to the secondary Ethernet port.
[Connection Example]
Primary
Ethernet Port
Secondary
Ethernet Port
IP-EXT
PBX
PC
IP-PT
Private IP
Network
Main Office
Branch Office
IP-PT
IP-PT
Conditions
• A V-IPEXT card or IP-EXT card is required to use IP-PTs.
• IP-PT registration is required through system programming before an IP-PT can be used with the PBX. An
IP-PT cannot be used unless an extension number is assigned. For details on how to register IP-PTs, see
the IP Networking Guide.
• The following features cannot be used with an IP-PT:
– XDP (® 1.11.9 Parallelled Telephone)
– Digital XDP (® 1.11.9 Parallelled Telephone)
– OHCA (® 1.8.4.3 Off-hook Call Announcement (OHCA))
– Using PC Phone or PC Console on a connected PC (® 1.32.2 PC Phone/PC Console)
• The KX-NT265 does not have a secondary Ethernet port.
• The following optional devices are available for the KX-NT400/KX-NT300 series (except KX-NT321) IP-PT:
– KX-NT307(PSLP1528) Bluetooth Module
– KX-NT303 Add-on 12 Key Module (not available for KX-NT400 or KX-NT366)
– KX-NT305 Add-on 60 Key Module (not available for KX-NT400 or KX-NT366)
• KX-NT307(PSLP1528) Bluetooth Module
A Bluetooth wireless headset can be registered to a KX-NT400/KX-NT300 series (except KX-NT321) IP-PT
containing the KX-NT307(PSLP1528) Bluetooth Module through personal programming. When Headset
Mode is off, the Bluetooth headset can be used to answer calls or redial. In this case, Headset Mode will
turn on automatically, and will turn off after you hang up.
This Bluetooth Module is also compatible with KX-DT343/KX-DT346 DPTs.
Feature Guide 381
1.31.1 IP Proprietary Telephone (IP-PT)

Table of Contents

Other manuals for Panasonic KX-NCP1000

Related product manuals